Discover the pinnacle of humidity management with the Anden Industrial Dehumidifier Model A710V1. Tailor-made for indoor growing environments, this cutting-edge dehumidifier offers unparalleled precision in humidity control. Engineered with VLGR (Variable Load Gas Reheat) technology, the A710V1 modulates its refrigeration system according to the load, ensuring optimal Vapor Pressure Deficit (VPD) throughout the growth cycle.
Whether you’re in the late flower stage or managing humidity levels during other critical phases of growth, the A710V1 empowers growers to fine-tune environmental conditions with ease. By maximizing VPD, this industrial-grade dehumidifier provides growers with greater control over their growing environment, resulting in healthier plants and higher yields.
With its robust construction and advanced features, the Anden Industrial Dehumidifier Model A710V1 is the ultimate solution for growers who demand precision, reliability, and performance. Experience the difference that precise humidity management can make in your indoor garden with the Anden A710V1.
Included Items:
- Control Dedicated monitoring and control of each dehumidifier at canopy height
- Drain fittings: 3/4″ MNPT x 3/4″ BARB – 3/4″ MNPT x 3/4″ Female pipe – 3/4″ x 3/4″ x 3/4″ T-Fitting – 3/4″ P-Trap
- Thermostat wire: 30′ 20 gauge 4-wire
Features:
- Control: Onboard digital with diagnostics
- Air supply orientation: Horizontal
- Filter: 29.5″ x 31.5″ 1.75″ MERV 11
- Refrigerant: R410A
- Coil type: Copper tube, Aluminum fin with I-coat
- Drain connection: 3/4″ FNPT (requires drain trap)
- P-Trap required: Yes (Included)
- Leveling feet: Sold separately
- Hanging brackets: Built-in
- Duct kit: Part #5829
- Warranty: 5 years on all parts including refrigeration system
Specifications:
- Capacity(1) PPD at 80°/60%RH: 710
- Energy factor(1): 3.0 L/kWh – 6.35 pints/kWh
- Voltage, Phase, Frequency: 208-240VAC, 1 Phase, 60 Hz
- Current draw (amps)(1): 19.6
- Power (watts)(1): 4,706
- BTU/h(2): 16,168
- Power cord type & length: SJT, L6-30P, 10′
- Hardwire: Field-configurable
- Breaker size: 30 amp
- Wire size: 10 Gauge copper
- CFM: 0.0″ w.c 1760 – 0.2″ w.c 1677 – 0.4″ w.c 1593 – 0.6″ w.c 1510
- Operating range temp/RH: 60/40 to 85/80
(1) Rated capacity and energy factor test done and current draw measured at 80°F/60% RH inlet air at 0.0 ESP, 240 VAC
(2) Total cooling load @ 80°F/60% RH and 240 VAC
